Drysuit Latex Neck Seal Replacement Kit

Drysuit Neck Seal Replacement Kit

Key Features:

• Complete Repair Solution: This kit includes all the components necessary to replace the cone-shaped neck seal on a drysuit, ensuring a high-quality, watertight repair at a fraction of the cost of professional services.

• Premium Adhesive: Comes with Stormoprene Contact Adhesive, a top-tier adhesive designed for strong, durable bonds on various rubber surfaces.

• Detailed Instructions: Full instructions included, making the replacement process straightforward and efficient.

Kit Contents:

1. Stormsure Cone Shaped Neck Seal:

• High-Quality Latex: Made in the UK for superior durability and flexibility.

• Size: Medium

• Top Cone Diameter: 38mm

• Bottom Cone Diameter: 89mm

• Height: 130mm

2. 90g Tube of Stormoprene Contact Adhesive: A specially formulated adhesive for high-performance bonding of Hypalon and other natural and synthetic rubber surfaces, ideal for drysuit repairs and other demanding marine applications.

Benefits:

• Cost-Effective: Save on expensive professional repairs by performing high-quality repairs yourself.

• Quick and Convenient: This kit is easy to use, allowing you to replace drysuit neck seals quickly and efficiently.

• Durable and Waterproof: Ensures a strong, watertight repair that maintains the integrity and performance of your drysuit.

Directions for Use:

1. Prepare the Suit:

• Cut off the damaged seal, leaving the part of the suit where the factory seal is attached to the fabric. The new seal will be glued over the old factory seal edge.

• Slide the new seal into the factory edge and secure it with an elastic band or bungee. Insert silicone/wax paper under the cut edge to prevent glue from sticking to the seal.

2. Clean and Sand:

• Clean the edge of the suit and the new seal edge with a solvent. Gently sandpaper it to roughen the surface. Ensure the small end of the seal is not overstretched.

3. Apply the Seal:

• Slide the seal over the factory rubber area and secure it with elastic bands if necessary.

• Roll back the new seal so that the 2cm edge that was over the old suit is now facing up.

4. Apply Adhesive:

• Apply a thin layer of Stormoprene Contact Adhesive to both the suit edge and the new seal edge. Wait 5 minutes, then apply a second layer of adhesive to each side. Use a spatula or knife to spread the glue evenly.

• When the glue is touch dry, roll the new latex seal into place over the rubber part of the old seal. Press firmly to ensure full adhesion.

5. Take Your Time:

• Ensure that the new seal is properly aligned and bonded. Take your time to avoid mistakes and ensure a long-lasting repair.

The Drysuit Wrist Seal Replacement Kit is an essential tool for any water sports enthusiast. With high-quality latex seals and premium Stormoprene adhesive, this kit ensures you can make quick, effective, and durable repairs to your drysuit, keeping it in peak condition for all your aquatic adventures.