Stormoprene Part B Hypalon Activator (10ml)

Introducing Stormoprene Part B Hypalon Activator, the essential 10ml additive designed to be mixed with Stormoprene Part A adhesive in a 25:1 ratio. Specifically developed for Hypalon and other low surface energy materials, this activator chemically enhances the adhesive bond—making strong, long-lasting repairs possible where standard adhesives alone would fail.

Key Features:

• Essential for Hypalon: Hypalon's low surface energy prevents good adhesion without chemical activation—Part B solves this problem.

• Improved Bond Strength: When combined with Stormoprene Part A, this activator ensures a robust chemical bond on difficult substrates.

• Precise Formulation: Use at a 25:1 ratio (Part A to Part B) for optimal performance in marine and outdoor environments.

• Compact Size: Supplied in a 10ml dropper bottle for accurate dosing and minimal waste.

Applications:

• Hypalon Repairs: Enables effective bonding to Hypalon in inflatable boats, dinghies, and RIB tubes.

• Marine Equipment: Strengthens bonds for dry suits, buoyancy aids, and other rubber-based marine gear.

• Technical Fabrics: Ideal for any application involving low surface energy substrates requiring enhanced adhesion.

Instructions for Use:

1. Preparation: Ensure surfaces are clean, dry, and lightly abraded where needed. Shake Part B well before use.

2. Mixing: Add Stormoprene Part B to Part A adhesive in a 25:1 ratio. Mix thoroughly to activate the bonding chemistry.

3. Application: Apply the mixed adhesive to both surfaces. Allow to dry for 5–10 minutes until tacky.

4. Bonding: Press surfaces together firmly. Full bond strength is achieved after 24 hours.