Stormcure Cure Time Accelerator (250ml)

Stormcure™ Accelerator is designed to be used with Stormsure® Flexible Repair Adhesive to dramatically reduce curing time. When mixed correctly, it shortens the standard 24–48 hour cure time to approximately 1 hour, making repairs significantly faster and more practical in time-critical situations.

Stormcure works by accelerating the curing reaction of the adhesive, without compromising bond strength. It is intended for controlled mixing with Stormsure Flexible Repair Adhesive and should be used only when a rapid cure is required.

Key Features:

• Rapid cure acceleration: Reduces cure time from up to 48 hours to around 1 hour.
• Precise mixing ratio: Designed for consistent results when mixed correctly.
• Compatible formulation: Specifically developed for use with Stormsure Flexible Repair Adhesive.
• Multi-purpose use: Can also be used for surface pre-cleaning and post-repair clean-up.

Mixing Ratio:

• 1 part Stormcure Accelerator : 5 parts adhesive
• 1ml accelerator : 5ml (5g) adhesive

A 250ml bottle is sufficient to accelerate approximately:

• 16 × 90g tubes of Stormsure Flexible Repair Adhesive
• 80 × 15g tubes of Stormsure Flexible Repair Adhesive
• 2400 × 5g tubes of Stormsure Flexible Repair Adhesive

How to Use:

1. Squeeze the required amount of adhesive into a disposable container, tray, or mixing surface.
2. Add Stormcure Accelerator at the correct ratio.
3. Mix thoroughly and quickly using a spatula or similar tool.
4. Apply the mixed adhesive directly to the repair area immediately.
5. The adhesive will begin curing significantly faster than normal.

Note: Any container or tool used for mixing will likely need to be discarded after use. Do not use valuable items.

Shipping Notice: Courier only. Cannot be sent by mail. Supplied in tins.